| Parameter Category | Specific Range |
|---|---|
| Thickness | 0.04 mm – 5 mm (nickel plate); 0.05 mm (common specification of nickel foil) |
| Hole Diameter | 0.3 mm – 25 mm, typical specifications such as 0.3 mm, 0.5 mm, 2 mm, 5 mm, etc. |
| Hole Shape | Round, oval, diamond, square, triangular, hexagonal, etc. Customized irregular holes are available. |
| Purity | 99.5%, 99.85%, meeting the requirements of high-precision fields such as electronics and chemicals. |
| Processing Method | Stamping forming, supporting slitting (minimum width 4 mm), punching, welding, and other deep processing. |
How to buy?
When you need to order or inquire about nickel punching mesh, you should specify the following parameters:
(1) Material: Specify which type of nickel material is required (such as Nickel 200, Nickel 201, etc.).
(2) Plate thickness (T): The thickness of the raw material directly affects the strength and durability of the net.
(3) Hole type: such as round hole, square hole, oblong hole, etc.
(4) Hole diameter (D): The opening size of the hole.
(5) Pitch: The distance between the centers of two adjacent holes.
(6) Perforation rate: The percentage of the area occupied by holes in the entire screen area, which affects filtration efficiency and flow rate.
(6) Dimensions: Required final width (B) and length (L).
(7) Surface requirements: Whether polishing or other treatments are required.
(1) Material: Specify which type of nickel material is required (such as Nickel 200, Nickel 201, etc.).
(2) Plate thickness (T): The thickness of the raw material directly affects the strength and durability of the net.
(3) Hole type: such as round hole, square hole, oblong hole, etc.
(4) Hole diameter (D): The opening size of the hole.
(5) Pitch: The distance between the centers of two adjacent holes.
(6) Perforation rate: The percentage of the area occupied by holes in the entire screen area, which affects filtration efficiency and flow rate.
(6) Dimensions: Required final width (B) and length (L).
(7) Surface requirements: Whether polishing or other treatments are required.
